Pioneer DEH-P75BT Displaying system version for repair, Selecting the incoming call, screen

Bluetooth Telephone

2Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

Note

When you push MULTI-CONTROL down while the BD address (or the device name) of this unit is displayed, the system version of this unit ap- pears. About the system version, refer to Display- ing system version for repair on this page.

Displaying system version for repair

Should this unit fails to operate properly and you consult with dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. You can display the versions and confirm them.

1Use MULTI-CONTROL to select Device Info in the function menu.

The device name (Pioneer BT Unit) of this unit appears in the display.

2Push MULTI-CONTROL down to switch to the system version of this unit.

The system (microprocessor) version of this

unit is displayed.

# Pushing MULTI-CONTROL left displays the version of the Bluetooth module of this unit.

Pushing MULTI-CONTROL right returns to the system version of this unit.

	Section
	08
	English
Selecting the incoming call
screen

You can assign one of screen movies to be dis- played for incoming calls. The selected movie appears on the right side of the screen when you receive a call.

A different screen movie can be assigned for each different user phone.

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO, ENTERTAINMENT and RECEIVING MOVIE appear in the display.

2Use MULTI-CONTROL to select

RECEIVING MOVIE.

Turn to change the menu option; press to se- lect.

3Turn MULTI-CONTROL to select the screen.

Each time MULTI-CONTROL is pushed up or down, the screens are switched in the follow- ing order:

Screen 1—Screen 2—Screen 3—Screen 4

4Press MULTI-CONTROL to store the screen movie.

The screen movie is stored and the display re- verts.

En 55