![Switching the sound muting/attenuation](/images/new-backgrounds/29912/29912175x1.webp)
Section
15 Initial Settings
Switching the sound muting/attenuation
Sound from this system is muted or attenu- ated automatically when the signal from the equipment with mute function is received.
!The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjust- ment is possible.
!Sound from this system returns to normal when the muting or attenuation is can- celed.
1Use
2Press
Pressing
tween TEL ATT (attenuation) and TEL mute (muting) and that status will be displayed.
Switching the feature demo
The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON.
1Use
Demonstration appears in the display.
2Press
ON appears in the display.
# To turn the feature demo off, press
Notes
!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.
!You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off.
For more details, see Feature demo mode on page 11.
Switching the reverse mode
If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.
1Use
Reverse mode appears in the display.
2Press
ON appears in the display.
# To turn the reverse mode off, press
Note
You can also turn on or off reverse mode by press- ing BAND while this unit is turned off. For more details, see Reverse mode on page 11.
Switching the Ever Scroll
When Ever Scroll is set to ON, CD text infor- mation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.
1Use
2Press
ON appears in the display.
# To turn the Ever Scroll off, press
88
En