Pioneer DEH-P75BT Built-inCD Player Scanning tracks of a CD, Using compression and BMX, English

Built-in CD Player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1Use MULTI-CONTROL to select Scan mode in the function menu. Scan mode appears in the display.

2Press MULTI-CONTROL to turn scan play

on.

The first 10 seconds of each track is played.

3When you find the desired track press MULTI-CONTROL to turn scan play off.

The track will continue to play.

# If the display has automatically returned to the playback display, select Scan mode again by using MULTI-CONTROL.

Note

After scanning of a CD is finished, normal play- back of the tracks will begin again.

	Section
	06
	English
Using compression and BMX

Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. Each of the functions has a two-step adjustment. The COMP function bal- ances the output of louder and softer sounds at higher volumes. BMX controls sound rever- berations to give playback a fuller sound. Lis- ten to each of the effects as you select through them and use the one that best en- hances the playback of the track or CD that you are listening to.

1Use MULTI-CONTROL to select Compression in the function menu. Compression appears in the display.

2Press MULTI-CONTROL to select your fa- vorite setting.

Press MULTI-CONTROL repeatedly to switch between the following settings:

COMP/BMX OFF—COMP 1—COMP 2— COMP/BMX OFF—BMX 1—BMX 2

Pausing CD playback

Pause lets you temporarily stop playback of the CD.

1Use MULTI-CONTROL to select Pause in the function menu.

Pause appears in the display.

2Press MULTI-CONTROL to turn pause

on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Selecting the search method

You can switch the search method between fast forward/reverse and searching every 10 tracks.

1Use MULTI-CONTROL to select Search mode in the function menu. Search mode appears in the display.

2Press MULTI-CONTROL to select the search method.

Press MULTI-CONTROL until the desired search method appears in the display.

!FF/REV – Fast forward and reverse

!Rough search – Searching every 10 tracks

En 29