Pioneer DEH-P75BT Tuner, Storing the strongest broadcast frequencies, Tuning in strong signals

Section

04 Tuner

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under 0-9 (1–6) on the remote contorl and once stored there you can tune in to those frequencies with the touch of a but- ton.

1Use MULTI-CONTROL to select BSM in the function menu.

BSM appears in the display.

2Press MULTI-CONTROL to turn BSM on. Searching is displayed. While Searching is displayed, the six strongest broadcast frequen- cies will be stored under 0-9 (1-6) on the re- mote control in the order of their signal strength. When finished, the preset channel

list appears.

# To cancel the storage process, press

MULTI-CONTROL.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Note

Storing broadcast frequencies with BSM may re- place broadcast frequencies you have saved using 0-9 (1–6) on the remote control.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to re- ceive.

1Press LIST to switch to the preset chan- nel list mode during the frequency display.

2Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically.

Notes

!You can also recall radio station frequencies assigned to preset tuning numbers by push- ing MULTI-CONTROL up or down during the frequency display.

!You can also recall radio station frequencies assigned to preset tuning numbers by press-

ing one of the preset tuning buttons 0-9 (1-6) on the remote control.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Use MULTI-CONTROL to select Local in the function menu.

Local appears in the display.

2Press MULTI-CONTROL to turn local seek tuning on.

Local seek sensitivity (e.g., Level 2) appears in

the display.

# To turn local seek tuning off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for MW/LW:

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The Level 4 setting allows reception of only

the strongest stations, while lower settings let you receive progressively weaker stations.

20 En