Section
12 
TV tuner
Watching the television
1 2
3
You can use this unit to control a TV tuner, which is sold separately.
For details concerning operation, refer to the TV tuner’s operation manual. This section pro- vides information on TV operations with this unit which differs from that described in the TV tuner’s operation manual.
1Band indicator
Shows which band the TV tuner is tuned to.
2Preset number indicator
Shows which preset has been selected.
3Channel indicator
Shows which channel the TV tuner is tuned.
1 Press SOURCE to select the TV.
Press SOURCE until you see Television dis- played.
2 Press BAND to select a band.
Press BAND until the desired band is dis- played,
3To perform manual tuning, push
The channels move up or down step by step.
4To perform seek tuning, push and hold
The tuner will scan the channels until a broad- cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
# If you push and hold
tuning starts as soon as you release
72
En
