Pioneer DEH-P75BT Other Functions Using the AUX source, Selecting AUX as the source, AUX1 source

Section

16 Other Functions

Using the AUX source

This unit can control up to two auxiliary equip- ments such as VCR or portable devices (sold separately). When connected, auxiliary equip- ments are automatically read in as AUX sources and assigned to AUX1 or AUX2. The relationship between AUX1 and AUX2 sources is explained below.

Selecting AUX as the source

%Press SOURCE to select AUX as the source.

Press SOURCE until AUX appears in the dis-

play.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on page 86.

About AUX1 and AUX2

You have two methods to connect auxiliary equipments to this unit.

AUX1 source:

When connecting auxiliary equipment using a stereo mini plug cable

%Insert the stereo mini plug into the input jack on this unit.

For more details, refer to the installation man- ual.

The allocation of this auxiliary equipment is automatically set to AUX1.

AUX2 source:

When connecting auxiliary equipment using an IP-BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separetely) to connect this unit to auxiliary equipment featuring RCA output.

For more details, refer to the IP-BUS-RCA Inter- connector owner’s manual.

The allocation of this auxiliary equipment is

automatically set to AUX2.

# You can only make this type of connection if the auxiliary equipment has RCA outputs.

Setting the AUX title

The title displayed for each AUX1 or AUX2 source can be changed.

1After you have selected AUX as the source, use MULTI-CONTROL and select FUNCTION to display TitleInput "A".

2Press DISPLAY to select the desired character type.

Press DISPLAY repeatedly to switch between the following character types:

Alphabet (upper case), numbers and symbols

—Alphabet (lower case)—European letters, such as those with accents (e.g. á, à, ä, ç)— Numbers and symbols

3Push MULTI-CONTROL up or down to select a letter of the alphabet.

Each time MULTI-CONTROL is pushed up, al- phabet, numbers or symbols are displayed in ascending order (A B C ...). Each time MULTI-CONTROL is pushed down, letters are displayed in descending order.

90 En