Pioneer DEH-P75BT RDS Receiving traffic announcements, Using PTY functions, English

RDS

Receiving traffic announcements

TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations).

1Tune in a TP or enhanced other net- work’s TP station.

When you are tuned into a TP or enhanced other network’s TP station the TP () indica- tor will light.

2Press TA/NEWS to turn traffic an- nouncement standby on.

Press TA/NEWS and TA ON appears in the display. The tuner will stand-by for traffic an-

nouncements.

# To turn traffic announcements standby off, press TA/NEWS again.

3Use MULTI-CONTROL to adjust the TA volume when a traffic announcement be- gins.

Rotate it to increase or decrease the volume. The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

4Press TA/NEWS while a traffic an- nouncement is being received to cancel the announcement.

The tuner returns to the original source but re- mains in the standby mode until TA/NEWS is

pressed again.

# You can also cancel the announcement by pressing SOURCE, BAND or MULTI-CONTROL while a traffic announcement is being received.

	Section
	05
	English
Notes

!You can also turn the TA function on or off in the menu that appears by using

MULTI-CONTROL.

!The system switches back to the original source following traffic announcement recep- tion.

!Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

Using PTY functions

You can tune in a station by using PTY (pro- gram type) information.

Searching for an RDS station by PTY information

You can search for general types of broadcast- ing programs, such as those listed on page 26.

1Use MULTI-CONTROL to select PTY search in the function menu. PTY search appears in the display.

2Push MULTI-CONTROL left or right to select a program type.

There are four program types: News&INF—Popular—Classics—Others

3Press MULTI-CONTROL to begin the search.

When you press MULTI-CONTROL the pro- gram type name in the display begins to flash. The unit searches for a station broadcasting that program type. When a station is found its program service name is displayed.

PTY (program type ID code) information is listed on page 26.

En 23