Audio Adjustments
Introduction of audio adjustments
1
1Audio display
Shows the audio adjustment status.
1Press
FUNCTION, AUDIO and ENTERTAINMENT appear on the display.
2Use
The audio function name appears on the dis- play.
3Turn
Turn
Fader (balance
# You can select the Sub W.2 only when sub-
woofer output is turned on in Sub W.1.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press BAND.
| Section |
| 14 |
| English |
Note |
If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.
Using balance adjustment
You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.
1Use
Fader appears in the display.
# If the balance setting has been previously ad- justed, Balance will be displayed.
2Push
Each time
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 87.
3Push
Each time
L 15 to R 15 is displayed as the left/right speaker balance moves from left to right.
En 79