Pioneer PRO-1000HDI manual Unit, Connection to INPUT1 and INPUT2, Connection to AV components

	Installation and Connections
	For the screen sizes and input signals that INPUT1
About the Input Connectors on this
	and INPUT2 are compatible with, please refer to
Unit	supplement 1 (pages 39 to 40) and supplement 2
	(page 41).
Consult the following chart when making connections to	Connection to AV components
a plasma display (pages 9 to 16).

Connected	Input Connector	INPUT	INPUT	INPUT	INPUT	INPUT
		1*1	2*1	3	4	5*4
component and signals
AV component	Analog RGB
	Component video
	S video
	Composite video
	Digital video					*5
Personal computer (PC)	Analog RGB	*2
	S video			*3
	Composite video				*3

*1 Although INPUT1/INPUT2 are compatible with various kinds of signals, setup using the on-screen menu is necessary after connections are made in order match the characteristics of the source component (pages 18 and 19).

*2 INPUT1 is compatible with Microsoft’s Plug & Play (VESA DDC 1/2B).

*3 Depending on the video output board of the computer, this type of connection may not be possible.

*4 Although INPUT5 is compatible with various kinds of signals, setup using the on-screen menu is necessary after connections are made in order match the characteristics of the source component (pages 20 and 21).

Connection to AV component that has

component video jacks

Make component video connections for AV components such as DVD and LD players or similar components with component video output capability.

When connecting to INPUT1

	INPUT1	OUTPUT
ANALOG RGB
	(ANALOG RGB)

Installation and Connections

Connection to INPUT1 and INPUT2

Various components can be connected to the INPUT1 and INPUT2 terminals. After connections are made, on-screen setup is necessary to match the characteristics of the connected component. Please see pages 18 and 19 for on-screen setup after connection.

INPUT2 terminal	[ON SYNC]			[H/V SYNC]
Output source	G	B	R	HD	VD
Video component/	G ON SYNC	B	R
Personal
computer (PC)	G	B	R	H/V SYNC
with RGB output
Video component	G	B	R	HD	VD
with component	Y	CB/PB	CR/PR
video output

: Do not connect anything. : Connect to this jack.

Note

Components compatible with INPUT1 are also compatible with INPUT2.

When making connections to INPUT1, please refer to supplement 4 on page 42.

On-screen setup is necessary after connection. Please see page 18.

When connecting to INPUT2

(ON SYNC)		INPUT2	(H/V SYNC)
G	B	R	HD	VD

75Ω Ô2k.Ω2

Connect the Y signal to the G terminal, the CB/PB signal to the B terminal, and the CR/PR signal to the R terminal. On-screen setup is necessary after connection.

Please see page 18.

9

PRO-1000HDI / PRO-800HDI