How to Route Cables, To remove speed clamps | Pioneer PRO-1000HDI

Installation and Connections

How to Route Cables

Speed clamps and bead bands are included with this unit for bunching cables together. Once components are connected, follow the following steps to route cables.

1

* As viewed from the rear of the display.

2

Installation and Connections

1Organize cables together using the provided speed clamps.

Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp.

Speed clamps are designed to be difficult to undo once in place. Please attach carefully.

To attach the speed clamps to the main unit

Connect the speed clamps using the 4 holes marked with • (Black dot) below, depending on the situation.

2Bunch separated cables together and secure them with the provided bead bands.

Note

Cables can be routed to the right or left.

Illustration depicts PRO-1000HDImodel.

To remove speed clamps

Using pliers, twist the clamp 90° and pull it outward. In some cases the clamp may have deteriorated over time and may get damaged when removed.

17

PRO-1000HDI / PRO-800HDI

Image 21

Pioneer PRO-1000HDI manual How to Route Cables, To attach the speed clamps to the main unit, To remove speed clamps

Contents

PRO-1000HDIPRO-800HDI Wash hands after handling Safety Precautions NEC Section Safety Precautions Iii Contents Before Proceeding How to Use This ManualAbout operations in this manual Screen Displays Cleaning cloth for wiping front panel Remote control unit÷ Warranty AA R6 batteries x Main Unit Part Names and FunctionsMain unit Operation panel on the main unit Remote Control Unit Inserting the batteries Remote control unitWhen handling the remote control unit Connection Panel Operating range of the remote control unit Illustration depicts $ Main power switchPart Names and Functions Audio Input Stereo mini jack Audio Output Stereo mini jack Installation of the Unit Installation and Connections Unit About the Input Connectors on thisConnection to INPUT1 and INPUT2 Connection to AV components Connection of composite Sync analog RGB Source Connection of G on Sync analog RGB source Connection to a personal computer When connecting to Output INPUT1Connection of separate Sync analog RGB Source To an external monitor 75Ω Ô2.kΩ2 Connection to INPUT4 Connection to INPUT3Connection to INPUT5 AV component About DTV Set Top Box Connection Connecting the speakersAudio Connections Making connections to the audio inputs on this unit INPUT3 Audio connection for component connected to Control Cord Connection Power Cord Connection To attach the speed clamps to the main unit How to Route CablesTo remove speed clamps Illustration depicts PRO-1000HDImodel Setting the Screen Mode/Input Signal Format Setting Up the SystemSetup after Connection INPUT1 When inputting a computer signal Setup of Clamp Position Clamp Position setup Setup after Connection INPUT5 Press 5/∞ to select Video SignalPress SET to select the desired Video Signal setting Press SET to select the desired Signal Range setting Press 5/∞ to select Signal RangePress SET to select the desired Audio Select setting Press 5/∞ to select Audio Select Operations Press STANDBY/ON to put this unit in the operation modeSelecting an Input Source Before you begin, make sure you have To adjust the volume To confirm display settingsTo mute the sound Changing the screen size Screen Size SelectionAutomatic screen size Moving the screen position upward or downward Partial Image Enlargement Area 3 display rangeArea 1 display range Area 2 display range To return to operating mode Automatic Power OFFWhen the setup is finished, press Menu to exit Menu screen All other cases Display Panel Adjustments Adjusting the Picture QualityTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Screen mode adjustment itemsPress 2/3 to select Screen When video signal input is selected To reset Screen mode settings to the defaultPress 2/3 to carry out the adjustment Use 5/∞ for the adjustments of V.POSITION Rewriting the Input Display Other OperationsPress SET to select Input Label Press Menu to return to the normal display screen Changing the Color Temperature Reducing Video Noise Digital NROther Viewing a Fast Moving Picture 3D Y/C Mode Setting the PureCinema modePress 5/∞ to select 3D Y/C Mode Press SET to set the mode to Motion Viewing in a Bright Location Power Control Function Audio Output Audio OUT Factory default setting is OFF. Each time SET isPress 5/∞ to select Auto Function Press SET to select Input 1 or Input Troubleshooting CleaningAbout the self diagnosis mode Additional Information General problems Problems commonly mistaken as breakdownProblem Possible Solution About the plasma panel’s STANDBY/ON indicatorProtection function Panel sticking and after-image lag Accessories SpecificationsGeneral PRO-1000HDI General PRO-800HDI Supplement 1 -1/2 PRO-1000HDI PC signal compatibilty table INPUT1, INPUT2Not available Refresh rate Screen size Dot x line Remarks Refresh rate Screen size Dot x line Video signal compatibilty table INPUT1, INPUT2 Digital signal compatibilty table INPUT5Supplement Component video signal Video signalExplanation of Terms Aspect ratio Additional Information TSZZF/03I00000