About DTV Set Top Box Connection | Pioneer PRO-1000HDI specs

Installation and Connections

About DTV Set Top Box Connection

To ensure proper connection, please carefully read the instruction manual supplied with the DTV set top box.

The set top box output signals that this display is compatible with are as follows.

	Video	Video signal	Video	Terminals where connection is possible
	Video		Video
	signal type		signal format	INPUT1 INPUT2 INPUT3 INPUT4 INPUT5
	signal type		signal format	INPUT1 INPUT2 INPUT3 INPUT4 INPUT5
	HDTV	1080i	Component
		720p	RGB
			RGB
			Digital
		1080p	Component
			RGB
	SDTV	480i	Composite
			S Video
			Component
			RGB
		480p	Component
			RGB
			Digital

Audio Connections

Before making connections, be sure to check that the audio component’s power and the unit’s main power is off.

Connecting the speakers

This unit is equipped with a 2W+2W internal amplifier. If speakers are to be connected to the unit, following the accompanying connection instructions.

Twist exposed wire strands together.

Push tab to the open position, and insert the wire. Then, close tab firmly to secure the wire in place.

Note

When making speaker connections, be sure to match the polarities (+ and –) of the speaker terminals on this unit and the corresponding terminals on the speakers. If the polarity is reversed, the sound will be unnatural and lack bass.

Making connections to the audio inputs on this unit

This unit features three audio inputs and one audio output. The following chart shows the video inputs and the corresponding audio input terminals.

	Video	Audio input	Sound output
	input	terminal	Sound output
	input	terminal
	INPUT1	Stereo mini jack	Sound of the selected video
	INPUT2	(L/R)	input is output from the
	INPUT3	Pin jacks (L/R)	• SPEAKER terminals
	INPUT4	Pin jacks (L/R)	• Stereo mini jack (L/R).
	INPUT5	Pin jacks (L/R)

14

PRO-1000HDI / PRO-800HDI

Image 18

Pioneer PRO-1000HDI manual About DTV Set Top Box Connection, Audio Connections, Connecting the speakers

Contents

PRO-1000HDIPRO-800HDI Safety Precautions Wash hands after handling Safety Precautions NEC Section Iii Contents About operations in this manual How to Use This ManualBefore Proceeding Screen Displays ÷ Warranty Remote control unitCleaning cloth for wiping front panel AA R6 batteries x Main unit Part Names and FunctionsMain Unit Operation panel on the main unit Remote Control Unit Inserting the batteries Remote control unitWhen handling the remote control unit Operating range of the remote control unit Connection Panel Part Names and Functions Audio Input Stereo mini jack $ Main power switchIllustration depicts Audio Output Stereo mini jack Installation and Connections Installation of the Unit Connection to INPUT1 and INPUT2 About the Input Connectors on thisUnit Connection to AV components Connection of G on Sync analog RGB source Connection of composite Sync analog RGB Source Connection of separate Sync analog RGB Source When connecting to Output INPUT1Connection to a personal computer To an external monitor 75Ω Ô2.kΩ2 Connection to INPUT5 Connection to INPUT3Connection to INPUT4 AV component Audio Connections Connecting the speakersAbout DTV Set Top Box Connection Making connections to the audio inputs on this unit Audio connection for component connected to INPUT3 Power Cord Connection Control Cord Connection To remove speed clamps How to Route CablesTo attach the speed clamps to the main unit Illustration depicts PRO-1000HDImodel Setup after Connection INPUT1 Setting Up the SystemSetting the Screen Mode/Input Signal Format When inputting a computer signal Clamp Position setup Setup of Clamp Position Setup after Connection INPUT5 Press 5/∞ to select Video SignalPress SET to select the desired Video Signal setting Press SET to select the desired Audio Select setting Press 5/∞ to select Signal RangePress SET to select the desired Signal Range setting Press 5/∞ to select Audio Select Selecting an Input Source Press STANDBY/ON to put this unit in the operation modeOperations Before you begin, make sure you have To adjust the volume To confirm display settingsTo mute the sound Automatic screen size Screen Size SelectionChanging the screen size Moving the screen position upward or downward Partial Image Enlargement Area 3 display rangeArea 1 display range Area 2 display range When the setup is finished, press Menu to exit Menu screen Automatic Power OFFTo return to operating mode All other cases Display Panel Adjustments Adjusting the Picture QualityTo reset Picture mode settings to the default Adjusting the Image Position and Clock Automatic Adjustment Screen mode adjustment itemsPress 2/3 to select Screen Press 2/3 to carry out the adjustment To reset Screen mode settings to the defaultWhen video signal input is selected Use 5/∞ for the adjustments of V.POSITION Press SET to select Input Label Other OperationsRewriting the Input Display Press Menu to return to the normal display screen Changing the Color Temperature Reducing Video Noise Digital NROther Press 5/∞ to select 3D Y/C Mode Setting the PureCinema modeViewing a Fast Moving Picture 3D Y/C Mode Press SET to set the mode to Motion Power Control Function Viewing in a Bright Location Press 5/∞ to select Auto Function Factory default setting is OFF. Each time SET isAudio Output Audio OUT Press SET to select Input 1 or Input About the self diagnosis mode CleaningTroubleshooting Additional Information General problems Problems commonly mistaken as breakdownProblem Possible Solution Protection function STANDBY/ON indicatorAbout the plasma panel’s Panel sticking and after-image lag General PRO-1000HDI SpecificationsAccessories General PRO-800HDI Not available PC signal compatibilty table INPUT1, INPUT2Supplement 1 -1/2 PRO-1000HDI Refresh rate Screen size Dot x line Remarks Refresh rate Screen size Dot x line Video signal compatibilty table INPUT1, INPUT2 Digital signal compatibilty table INPUT5Supplement Explanation of Terms Video signalComponent video signal Aspect ratio Additional Information TSZZF/03I00000