Emerson RTM-ATCA-7350 manual Connecting KVM Cables

Hardware Preparation and Installation Connecting KVM Cables

Cable Damage

zThere is a back cable trough at the back side of the shelf. You need to arrange and identify all cables and then bind and fasten them in the back cable through after connecting them.

zIf you use excessive force when installing cables, the cables may be damaged.

zDo not exert too much force when you insert or remove the cables. Do not twist or tear the cables in any condition.

2.8.1Connecting KVM Cables

The figure below shows the method of connecting the Keyboard, Video, Mouse (KVM) cables to RTM-ATCA-7350 when connecting PS/2 compatible keyboard and mouse using a PS/2-USB converter. USB based keyboard and mouse can also be attached to the RTM by using a USB hub.

Product Damage

You have to use matching interfaces for the KVM cables.

Use a PS/2-USB converter when connecting to PS/2 based keyboard and mouse cables.

Use a USB hub when connecting to USB based keyboard and mouse cables.

Figure 2-7 Connecting the KVM Cables to RTM-ATCA-7350

34 RTM-ATCA-7350 Installation and Use (6806800H30F)