Hardware Preparation and Installation

Connecting Optical Fibers

 

 

2.8.3Connecting Optical Fibers

When RTM-ATCA-7350 is configured with the FC daughter card, it provides two external 2G FC interfaces. Optical fibers are used to connect RTM-ATCA-7350 to the external Storage Area Network (SAN) storage system. Optical modules for the FC daughter cards must be obtained separately. Recommended modules are FINISAR FTRJ8519P1BNL-HW, FINISAR FTRJ8519P2BNL-HW.

As shown in steps 1 and 2 in the figure below, insert the optical module in the FC interface and then insert the optical fibers in the optical module.

Figure 2-9 Connecting the Optical Fibers to RTM-ATCA-7350

1

2

36

RTM-ATCA-7350 Installation and Use (6806800H30F)

Page 36
Image 36
Emerson manual Connecting Optical Fibers, Connecting the Optical Fibers to RTM-ATCA-7350