Controls, LEDs and Connectors | Connectors |
| |
3.2.2.1.1USB Port
RTM-ATCA-7350 provides a single port USB connector on the face plate. The USB port is compliant to the USB 1.1 specification. The following USB Port Pin Assignment table describes the pinout information.
Figure 3-4 RTM-ATCA-7350 Front Plate USB Connector Pinout
Table 3-2 USB Port Pin Assignment
Pin | Pin Name | Description |
| | |
1 | +5V | +5V Power Supply, Max 500mA each port. |
| | |
2 | Data- | Differential Data transmitting pair. |
| | |
3 | Data+ | |
| | |
4 | GROUND | Ground, connected to the logic GND of ATCA-7350. |
| | |
3.2.2.1.2VGA Port
ATCA-7350 provides its VGA output port through RTM-ATCA-7350. The VGA port on RTM- ATCA-7350 use a DB15 female connector with a signal definition compatible to the standard VGA plug.
Figure 3-5 RTM-ATCA-7350 Front Plate VGA Port Pinout
42 | RTM-ATCA-7350 Installation and Use (6806800H30F) |
