Emerson RTM-ATCA-7350 manual Environmental and Power Requirements, Environmental Requirements

Hardware Preparation and Installation Environmental and Power Requirements

3.Remove the desiccant bag shipped together with the blade and dispose of it according to your country’s legislation.

The product is thoroughly inspected before shipment. If any damage occurred during transportation or any items are missing, please contact our customer's service immediately.

2.3Environmental and Power Requirements

The following environmental and power requirements are applicable to the board.

2.3.1Environmental Requirements

Table 2-1 Environmental Requirements

Requirement	Operating	Non-Operating
Temperature	+5ºC (41ºF) to +40ºC (104ºF) (normal operation)	-40ºC (-40ºF) to +70ºC
	according to NEBS Standard GR-63-CORE	(158ºF) (may be further
	-5ºC to +55ºC (short term operation) according to	limited by installed
		accessories)
	NEBS Standard GR-63-CORE
Temp. Change	+/- 0.25ºC/min or 15ºC/h (59ºF/h) according to	+/- 0.25ºC/min or 15ºC/h
	NEBS Standard GR-63-CORE	(59ºF/h)
Rel. Humidity	5% to 85% non-condensing according to Emerson	5% to 85% non-condensing
	Network Power Embedded Computing-internal	according to Emerson
	environmental requirements	Network Power Embedded
		Computing-internal
		environmental
		requirements
Altitude	<= 4000m
Vibration	1.0g from 5 to 100 Hz and back to 5 Hz at a rate	5-20 Hz @ 0.01 g2/Hz
	of 0.1 octave/minute	20-200 Hz @ -3.0
		dB/octave
		Random 5-20 Hz @ 1
		m2/Sec3
		Random 20-200 Hz @ -3
		m/Sec2
Shock	Half-sine, 11 m/Sec, 30mSec/sec2	Blade level packaging
		Half-sine, 6 mSec at 180
		m/Sec2

18 RTM-ATCA-7350 Installation and Use (6806800H30F)