Emerson RTM-ATCA-7350 manual Wearing the ESD-Preventive Wrist Strap

Hardware Preparation and Installation Wearing the ESD-Preventive Wrist Strap

To wear the ESD-preventive wrist strap, proceed as follows:

1.Wrap the ESD-preventive wrist strap around your wrist, as shown in the figure below.

2.Fasten the latch. Make sure that the ESD-preventive wrist strap well touches your bare wrist.

3.Insert the grounding terminal of the ESD-preventive wrist strap in the jack of the cabinet or shelf.

Figure 2-1 Wearing the ESD-Preventive Wrist Strap

22 RTM-ATCA-7350 Installation and Use (6806800H30F)