Installation and Connections
Installation of the Unit
Installation using the optional PIONEER stand or installation bracket
÷Please be sure to request installation or mounting of this unit or the installation bracket by the dealer where purchased.
÷When installing, be sure to use the bolts provided with the stand or installation bracket.
÷For details concerning installation, please refer to the instruction manual provided with the stand or installation bracket.
Wall-mount installation of the unit
This unit has been designed with bolt holes for
÷Be sure to attach in 4 or more locations above and below, left and right of the center line.
÷Use bolts that are long enough to be inserted 1/2 inch (12 mm) to 11/16 inch (18 mm) into the main unit from the attaching surface for both a holes and b holes.
Refer to the side view diagram below.
÷As this unit is constructed with glass, be sure to install it on a flat, unwarped surface.
Installation using accessories other than the PIONEER stand or installation bracket (sold separately)
÷When possible, please install using parts and accessories manufactured by PIONEER. PIONEER will not be held responsible for accident or damage caused by the use of parts and accessories manufactured by other companies.
÷For custom installation, please consult the dealer where the unit was purchased.
CAUTION
To avoid malfunction, overheating of this unit, and possible fire hazard, make sure that the vents on the main unit are not blocked when installing. Also, as hot air is expelled from the air vents, be careful of deterioration and dirt build up on rear surface wall, etc..
CAUTION
Please be sure to use an M8 (Pitch = 1.25 mm) bolt. (Only this size bolt can be used.)
|
|
|
| Attaching surface | |
|
|
|
|
| Installation |
|
|
|
| Main unit | bracket, etc.. |
|
|
|
|
| |
|
|
|
| a hole | |
|
|
| Center line |
| Bolt |
|
|
|
|
| |
b hole | a hole | a hole | b hole |
|
|
|
|
|
|
| 1/2 inches (12 mm) to |
|
|
|
|
| 11/16 inches (18 mm) |
|
|
|
| Bolt |
|
|
|
|
| b hole |
|
| Center line |
| 1/2 inch (12 mm) to |
| |
| Rear view diagram |
| |||
| 11/16 inch (18 mm) |
| |||
| Air vents (fan) |
|
| Side view diagram | |
|
|
|
|
| |
|
|
| CAUTION |
| |
|
|
| This display unit weighs at least 67 lbs (30 kg) and has | ||
|
|
| little | ||
|
|
| stood on edge. As a result, two or more persons | ||
|
|
| should cooperate when unpacking, moving, or installing | ||
|
|
| the display. |
|
|
| a hole | Center line | CAUTION |
| |
|
|
| |||
| a hole |
| This unit incorporates a thin design. To ensure safety if | ||
|
|
| vibrated or shaken, please be sure to take measures to | ||
|
|
| prevent the unit from tipping over. |
| |
|
|
| 7 Optional line (sold separately) |
| |
|
|
| (For details, please consult the dealer where this | ||
|
|
| unit was purchased.) |
| |
| Center line |
| 1 Table top stand | : | |
|
|
| display stand. |
| |
| Rear view diagram |
| 2 Wall installation unit : Wall installation bracket | ||
|
|
| designed as a wall interface | ||
|
|
|
| for securing the unit. | |
8
