Pioneer VSX-24TX MULTI-ROOM set up VSX-27TX/26TX only, Press System Setup on the remote control

Using Other Functions

MULTI-ROOM set up (VSX-27TX/26TX only)

After you have completed the necessary connections for MULTI-ROOM operation you need to set up the receiver for such operation. Follow the instructions below. The page after this one explains how to use the MULTI-ROOM function once it's been set up.

3,4,5

2,6

ë

S0URCERECEIVER

MULTI SYSTEM

OPERATION OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER	TVCONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦	7	3	8
- TUNING +		- STATION +
1 Á 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE			EXIT
	0		ENTER
+10			DISC
	TV
TV VOL	TV CONTROL		VOLUME
	TV FUNC
EFFECT	MENU		MUTE
/CH SEL
			FUNCTION
	ENTER
			SIGNAL
			SELECT
		/dts
SYSTEM	THX	ADVANCED	STANDARD
SETUP

REMOTE

SETUP MIDNIGHT DSP STEREO

DIGITAL NR

DIGITAL MULTI PROCESSING AMPLIFIER

REMOTE CONTROL UNIT

1 Turn on your TV and the receiver.

1	Make sure your TV is set to the receiver.
	2 Press SYSTEM SETUP on the remote control.
	The REMOTE SETUP MENU appears on your TV screen. You can
	escape from this screen at any time by pressing SYSTEM SETUP
	again.
	Multi-Room
	Volume Level	￿
		￿

[VARIABLE] IR Receiver

[PIONEER] ￿

[EXIT]

CAUTION : If the "FIXED" position is chosen, the volume will be loud.

3 Use the 5´° buttons to select the MULTI-ROOM set up mode and press ENTER.

4 Select the VOLUME LEVEL by using the 2´3 buttons.

If you hook up a just a power amplifier in the sub room the VSX- 27TX/26TX will act as a pre-amp. In this case choose VARIABLE for the VOLUME LEVEL setting. If you hook up a full integrated amplifier in the sub room (such as another Pioneer VSX receiver) choose FIXED for the VOLUME LEVEL setting.

CAUTION!

If the MULTI ROOM is set to FIXED the volume on the main unit will be set to maximum. Thus, when output, it will be extremely loud. Please set the master volume controls of the integrated amplifier in the sub room very low at first and experiment to find a suitable volume.

5 Select the IR RECEIVER type with the 5´° buttons and select the type by using the 2´3 buttons.

If you have the Pioneer-made MR-100 select PIONEER. If you have an IR RECEIVER from a different company, select OTHER.

6 Move to the EXIT setting and press ENTER to exit MULTI-ROOM set up and return to the SYSTEM SETUP MENU operations.

You can leave the MULTI ROOM set up mode any time by pressing the SYSTEM SETUP button.

memo • Some IR RECEIVERS may not work with this system, check with a PIONEER representative to be sure.

•For the VSX-24TX the VOLUME LEVEL is set to FIXED and the IR RECEIVER is set to PIONEER.

68