Pioneer VSX-27TX, VSX-26TX Using Other Functions, Recording from Audio Components, set to analog

Using Other Functions

Recording from Audio Components

The following explanations show you how to record an analog audio signal with the component you connected to the MD/TAPE 1 or TAPE 2 MONITOR jacks. Note that you cannot record an component that is only connected digitally. If you want to record from a digital component it must be connected in an analog manner as well. If you want to record a digital signal see the next page.

memo The receiver's volume, channel level, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect on the recorded signal and the EXTERNAL 5.1 CH input cannot be recorded.

ë

S0URCERECEIVER

MULTI SYSTEM

OPERATION OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER	TVCONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦	7	3	8
- TUNING +		- STATION +
1 Á 4 ¢
DTV ON/OFF DTV MENU		- CHANNEL +

1	Select the source component and put the receiver in
	that function. Remember, SIGNAL SELECT must be
1	set to analog.
	Press the SIGNAL SELECT button on the remote control (or use
	the button on the front panel) and choose ANALOG. Recording
	DIGITAL or AC-3 RF (VSX-27TX only) signals is not possible.
2

1 2

45

78

GUIDE

0

+10

TV

TV VOL TV CONTROL

TV FUNC

EFFECT	MENU
/CH SEL

3

6

9

EXIT

ENTER

DISC

VOLUME

MUTE

FUNCTION

Start recording with a TAPE or MD (etc.).

3 Playback the source to be recorded.

Record monitor (TAPE 2 MONITOR)

If you connect a cassette deck (etc.) with a record monitor function to the TAPE 2 MONITOR jacks, you can listen to the sound of the recording as it is recorded.

Press TAPE 2 MONITOR to switch between the sound of the recording (TAPE 2 indicator on) and the sound of the

ENTER

			SIGNAL
			SELECT
		/dts
SYSTEM	THX	ADVANCED	STANDARD
SETUP

REMOTE

SETUP MIDNIGHT DSP STEREO

DIGITAL NR

source component (TAPE 2 indicator off).

DIGITAL MULTIREMOTEPROCESSINGCONTROL￿AMPLIFIER

60