Pioneer manual Specifications, VSX-27TX Amplifier Section, VSX-26TX, VSX-24TX, VIDEO Section

Techno Tidbits & Problem-solving

Specifications

VSX-27TX : Amplifier Section

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers.

**Measured by Audio Spectrum Analyzer.

Continuous average power output of 120 watts* per channel, min., at 6 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front).

VSX-26TX:

Continuous average power output of 100 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front).

VSX-24TX :

Continuous average power output of 90 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front).

VSX-27TX :

Continuous Power Output

Front	120 W + 120 W (20-20 kHz, 0.09 %, 6 Ω)
Center	120	W (20-20 kHz, 0.09 %, 6 Ω)
Rear	120 W + 120 W (20-20 kHz, 0.09 %, 6		Ω)
VSX-26TX :
Continuous Power Output
Front	100 W + 100 W (20-20 kHz, 0.09 %, 8		Ω)
Center	100	W (20-20 kHz, 0.09 %, 8	Ω)
Rear	100 W + 100	W (20-20 kHz, 0.09 %, 8	Ω)

VSX-24TX :

Continuous Power Output

Front	90 W + 90 W (20-20 kHz, 0.09 %, 8 Ω)
Center	90 W (20-20 kHz, 0.09 %, 8 Ω)
Rear	90 W + 90 W (20-20 kHz, 0.09 %, 8 Ω)
Input (Sensitivity/Impedance)
PHONO MM	4.7 mV/47 kΩ
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
........................................................................	335 mV/47 kΩ
Phono Overload level (T.H.D.0.1 %, 1kHz)
PHONO MM	120 mV
Frequency Response
PHONO MM	20 Hz to 20,000 ± 0.3 dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
.......................................................	5 Hz to 100,000 Hz –3+0dB
Output (Level/Impedance)
VCR 1 REC, VCR 2 REC, MD/TAPE 1 REC, TAPE 2 REC ..... 335 mV/2.2 kΩ
Tone Control
BASS	± 6 dB (100 Hz)
TREBLE	± 6 dB (10 kHz)
LOUDNESS	+3 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM	80 dB
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2
...................................................................................	101 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
PHONO MM	80 dB

VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE 1, TAPE 2

..................................................................................... 83 dB

VIDEO Section

Input (Sensitivity/Impedance)	................... 1 Vp-p/75 Ω
VCR 1, VCR 2, DVD/LD, TV/SAT, VIDEO
Output (Level/Impedance)	1 Vp-p/75 Ω
VCR 1, VCR 2, MONITOR
Frequency Response	5 Hz to 10 MHz –3+0dB
VCR 1, VCR 2, MONITOR
Signal-to-Noise Ratio	65 dB

FM Tuner Section

Frequency Range	87.5 MHz to 108 MHz
Usable Sensitivity	Mono: 13.2 dBf, IHF (1.3 µV/75 Ω)
50 dB Quieting Sensitivity	Mono: 20.2 dBf
	Stereo: 38.6 dBf
Signal-to-Noise Ratio	Mono: 73 dB (at 85 dBf)
	Stereo: 70 dB (at 85 dBf)
Distortion	Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity	............................. 60 dB (400 kHz)
Stereo Separation	40 dB (1 kHz)
Frequency Response	30 Hz to 15 kHz (± 1) dB
Antenna Input	75 Ω unbalanced

AM Tuner Section

Frequency Range	530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna)	350 µV/m
Selectivity	25 dB
Signal-to-Noise Ratio	50 dB
Antenna	Loop antenna

Miscellaneous

Power Requirements		AC 120 V, 60 Hz
VSX-27TX :
Power Consumption		460 W, 630 VA
Power Consumption in Standby mode		............................. 1.0 W
AC Outlet SWITCHED (×2)	Total 100 W (0.8 A) MAX
AC Outlet UNSWITCHED		100 W (0.8 A) MAX
Dimensions	420 (W) × 173 (H) × 470 (D) mm
16-9/16 (W) × 6-13/16 (H) × 18-1/2 (D) in
Weight (without package)		14.7 kg (32 lb 7 oz)
VSX-26TX/24TX :
Power Consumption		400 W, 550 VA
Power Consumption in Standby mode		............................. 1.0 W
AC Outlet SWITCHED (×2)	Total 100 W (0.8 A) MAX
AC Outlet UNSWITCHED		100 W (0.8 A) MAX
Dimensions	420 (W) × 173 (H) × 470 (D) mm
16-9/16 (W) × 6-13/16 (H) × 18-1/2 (D) in
Weight (without package)		14.1 kg (31 lb 1 oz)

Furnished Parts

FM Antenna	1
AM Loop Antenna	1
Dry Cell Batteries (SIZE “AA” (IEC LR6))	2
Remote Control Unit	1
Operating Instructions	1

NOTE:

Specifications and the design are subject to possible modifications without notice, due to improvements.

78