Pioneer VSX-26TX Channel Delay, Use the 5´ buttons to select a speaker. Specify, Press ENTER

Surround Sound Set Up

Channel Delay

Adding a slight delay to some speakers is necessary to achieve a surround sound effect. You need to figure out the distance from your listening position to your speakers to add the proper delay. The following steps show you how to set the delay time for each channel by specifying the distances from your listening position to each speaker. Once you specify the speaker distances, the receiver calculates the correct delay times automatically. If continuing from SPEAKER SETTING go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.24) first.

ë

S0URCERECEIVER

MULTI SYSTEM

OPERATION OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER TVCONT
	TAPE1

1 Select CHANNEL DELAY (if continuing from last set up, it will already be selected).

See “Setting Up for Surround Sound“ on page 24 if you are unsure how to do this.

Press ENTER.

CLASS	MPX BAND		DIRECT ACCESS
¦	7	3	8
- TUNING +		- STATION +
1 Á 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE			EXIT
	0		ENTER
+10			DISC
	TV
TV VOL	TV CONTROL		VOLUME
	TV FUNC
EFFECT	MENU		MUTE
/CH SEL

Channel Delay

Front L [10ft]

Center [10ft]

Front R [10ft]

Surround R [10ft]

Surround L [10ft]

Subwoofer [10ft]

[EXIT]

memo

The default setting is 10 ft.

	FUNCTION	2	Use the 5´° buttons to select a speaker. Specify
ENTER		1-3	the distance from your listening position to each
	/dts		speaker using the commands below.
	SIGNAL
	SELECT

SYSTEM	THX	ADVANCED STANDARD
SETUP

REMOTE

SETUP MIDNIGHT DSP STEREO

DIGITAL NR

1Press 2 or 3 to adjust the speaker distance in 1 foot increments from 1 to 30 feet. (1 foot equals approximately

0.3 meters.)

2Use the 5´° buttons to move to the next set of speakers

3 Repeat for each speaker.

DIGITAL MULTI PROCESSING AMPLIFIER

REMOTE CONTROL UNIT

NOTE : Sound takes about 1 ms (millisecond) to travel 1 foot.

3 Select EXIT with the 5´° buttons and press ENTER to return to the SYSTEM SETUP MENU.

Next, proceed to CHANNEL LEVEL below.

If you want to change a setting before proceeding

Simply use the arrow buttons to go back.

28