Pioneer VSX-27TX To exit before outputting the TEST TONE, To exit while outputting the TEST TONE

Surround Sound Set Up

3 After selecting SETTING START with the ° button press ENTER. The TEST TONE will be output.

These settings will be displayed on your TV.

ë

S0URCERECEIVER

MULTI SYSTEM

OPERATION OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER	TVCONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦	7	3	8
- TUNING +		- STATION +
1 Á 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE			EXIT
	0		ENTER
+10			DISC
	TV
TV VOL	TV CONTROL		VOLUME
	TV FUNC
EFFECT	MENU		MUTE
/CH SEL

FUNCTION

	ENTER		3,4
		SIGNAL
		SELECT
		/dts
SYSTEM	THX	ADVANCED STANDARD
SETUP

REMOTE

SETUP MIDNIGHT DSP STEREO

DIGITAL NR

DIGITAL MULTI PROCESSING AMPLIFIER

REMOTE CONTROL UNIT

memo It is possible to set channels levels independently for Surround/dts, STEREO, EXTERNAL DECODER and

each DSP mode for listening-once purposes (see p.22 6) but if you do so these levels will remain in Surround/dts setup mode unless put back to zero. They will show up the display in step 3.

	Channel Level
		Test Tone				[ AUTO ]
		[						]
			Setting OK
		Front				[			]
							0dB
				L
		Center				[	0dB]
		Front				[ 0dB]
				R
		Surround				[ 0dB]
					R
		Surround				[ 0dB]
					L
		Subwoofer				[ 0dB]
SIGNAL								STEREO		VOLUME
SELECT
		SP A
ANALOG										dB
AUTO

It takes a moment for the machine to set itself. MASTER VOLUME rotates to the reference position (0dB), and the test tone is output.

To exit before outputting the TEST TONE

Press ENTER

To exit while outputting the TEST TONE

Press ENTER.

4 Adjust speaker levels so that you hear the test tone at the same volume from each speaker when seated in your main listening position.

NOTE : The volume of the sub-woofer tends to sound lower than it actually is, you may need to raise its level after testing the sound with actual soundtracks.

In AUTO mode

1Press 2 or 3 to adjust the level of the speaker outputting the TEST TONE.

In MANU mode

1Press 2 or 3 to adjust the level of the first speaker.

2Press 5r° to switch the TEST TONE to the next speaker.

3 Repeat 1 and 2 for each speaker.

If you are using a Sound Pressure Level (SPL) meter

Take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighted/slow model).

5 When you have adjusted each speaker level, press ENTER to return to the previous screen

The MASTER VOLUME will return to its original position. Next, proceed to CROSSOVER NETWORK below.

If you want to change a setting before proceeding.

Simply use the arrow buttons to go back.

6 Select EXIT with the 5r° buttons and press ENTER to return to the SYSTEM SETUP MENU

30