Pioneer VSX-26TX manual Surround Sound Set Up, Press the 5or arrow buttons to move the hand

Surround Sound Set Up

EFFECT	MENU		MUTE	3	Press the 5or °arrow buttons to move the hand
/CH SEL
			FUNCTION		to the mode you want. Then press ENTER.
	ENTER			3	In each mode, the current settings are displayed automatically.
			SIGNAL
			SELECT		We suggest you adjust all these settings when you first hook up
		/dts			the receiver. That gets them out of the way and you won't need
SETUP	THX	ADVANCED	STANDARD
SYSTEM
REMOTE					to return to this setting mode unless you change your home set
	MIDNIGHT	DSP	STEREO		up by adding new speakers (etc.). The sound set up modes
SETUP
			DIGITAL NR
					explained here are:
					Speaker Setting (See p.26-27)
DIGITAL MULTI PROCESSING AMPLIFIER					Use to specify the type and number of speakers you connected.

REMOTE CONTROL UNIT

Channel Delay (See p.28)

Set up all your speakers for the most realistic surround sound. Adding a slight delay to some speakers enhances sound separation and is particularly important for achieving a surround sound effect. You need to figure out the distance from your listening position to your speakers to add the proper delay.

Channel Level (See p.29-30)

Use to balance the volumes of your different speakers.

Crossover Network (See p.31)

This feature lets you select which bass frequencies will be sent to the sub woofer or front speakers.

Bass Peak Level Manager (See p.32)

Dolby Digital and DTS audio sources include ultra-low bass tones. Set the bass peak level as needed to prevent the ultra- low bass tones from distorting the sound from the speakers.

D-Range Control (See p.33)

This feature makes possible excellent surround sound effects when listening to Dolby Digital sources at low volumes.

Digital-In Select (See p.34)

In order to use your digital components you must match the numbered digital input settings with the numbered digital jacks used by your digital components.

Multi-Room [VSX-27TX/26TX only] (See p.67-71)

You can set up this unit to power systems in different rooms.

4 Go on to the next page to continue set up.

To exit the SYSTEM SETUP MENU and on-screen display press SYSTEM SET UP button again.

memo After you complete one of the SYSTEM SETUP menus and return to the basic SYSTEM SETUP screen (shown in the diagram directly above labeled 4), the receiver automatically moves the cursor to the next SYSTEM SETUP menu. For example, if you've completed SPEAKER SETTINGS and returned to the basic SYSTEM SETUP screen, CHANNEL DELAY will be selected automatically. You can notice this on your TV screen.

SET UP

25