Pioneer VSX-24TX Press REMOTE SETUP and 2 at the same time to, select the LEARNING SETUP mode

Remote Control of Other Components

Learning mode: Programming signals from other remote controls

If preset codes are not available for your component(s), or the available preset codes do not operate correctly, you can use this function to program in signals from the remote control(s) of your other component(s). This operation can also be used after recalling a preset code to program additional operations not covered in the preset codes.

3

2

ë

S0URCERECEIVER

MULTI SYSTEM

OPERATION OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER	TVCONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦	7	3	8
- TUNING +		- STATION +
1 Á 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE			EXIT
	0		ENTER
+10			DISC
	TV
TV VOL	TV CONTROL		VOLUME
	TV FUNC
EFFECT	MENU		MUTE
/CH SEL
			FUNCTION
	ENTER
			SIGNAL
			SELECT
		/dts
SYSTEM	THX	ADVANCED	STANDARD
SETUP

REMOTE

SETUP MIDNIGHT DSP STEREO

DIGITAL NR

DIGITAL MULTI PROCESSING AMPLIFIER

REMOTE CONTROL UNIT

1 Turn on your TV and the receiver.

1	Make sure your TV is set to the appropriate video input (e.g.
4	VIDEO 1).
2	Press REMOTE SETUP.
	The REMOTE SET UP menu appears on your TV screen.
	Select Remote
	Setup Mode
	Remote SETUP+1
	Preset Recall
	Remote SETUP+2
	Learning
	Remote SETUP+3
	Multi-Operation
	Remote SETUP+4
	Direct Function
3	Press REMOTE SETUP and 2 at the same time to
	select the LEARNING SETUP mode.

All the MULTI CONTROL buttons (except the TUNER button) start to blink.

To cancel LEARNING SETUP mode

Press REMOTE SET UP.

Learning Setup

1Place both commanders pointing at each other.

2Select the item from the Multi-control buttons that should be duplicated. (ex. DVD) Multi-control button starts blinking.

EXIT=Remote setup

4 Press the MULTI CONTROL button for the component you want to control.

Each button can be set to control one of the following components

The selected button continues to blink.

Learning Setup

3Press one button that should be duplicated.

4Multi-Contorol button lights up.

5Press one button on the original commander, and hold 2 to 10 seconds.

6Repeat this process to duplicate next command. EXIT=Remote setup

50