3.2.3 Windows 2000, XP
1)After connecting MEDIAGATE T1 and plugging in AC power cable, Windows will install the driver automatically. Check the driver installation by going to [Start menu, Settings, Control Panel, (switch to Classic View on Windows XP), System, Hardware, Device manager, Universal Serial Bus controllers] You should see a USB Mass Storage Device.
2)Check ‘My Computer’ or ‘Explorer’, there should be a new hard drive designated volume. You can copy any data to this volume.
üIf new volume has not appeared, check HDD format and HDD file system. Windows 2000 and XP need to detect MEDIAGATE T1 as a FAT32 file system.
3)After copying data, remove MEDIAGATE T1 by
using remove icon 
at task on the lower right hand corner of your screen. If you do not follow this
procedure, data and MEDIAGATE T1 may be damaged.
üIf you see ‘Non
This message will be displayed on Windows XP when you plug MEDIAGATE T1 into USB 1.1 spec. Host adapter.
42
