Manuals / Polaroid / Computer Equipment / Projector

Polaroid Polaview 220 manual Connector panel, The connector panel

Models: Polaview 220

1 44

Download 44 pages 38.07 Kb

Page 14

Connector panel

10Detailed setup

Connector panel

All connections between the projector and your computer or video source are made on the rear connector panel.

The connector panel

SOURCE 1		SOURCE 2
L	R	L	R

VIDEO INPUTS

SOURCE 3	SOURCE 4
STEREO	STEREO
MAC / PC	PC / MAC

COMPUTER INPUTS

OUTPUTS

STEREO L R

REDRIVE RS 232

Input: 120/230V~ 60/50Hz,5.0/2.5A

CAUTION !

For continued protection against the risk of fire, replace only with the same type and rating of fuse.

Double pole / Neutral fusing

Type and Rating: T Slow-blow, 6.3A, 250V-

Note: Whenever you connect the projector to a computer or video source for the first time, the projector defaults to the factory settings. Due to operational differences between computers and video sources, it may be necessary to make minor adjustments to the settings. See Image optimization in Chapter 4, Using the projector for more information. The projector stores any modified settings and defaults to them when you turn the power off and on again.

Image 14

Polaroid Polaview 220 manual Connector panel, The connector panel

Contents

Polaview Warning This equipment generates, uses and can 3 Using the projector Table of contents2 Detailed setup 1 IntroductionAppendix A Parts 4 Maintenance5 Troubleshooting Appendix B Standards1 Introduction c Mac multiscan redrive adapter d VGA/Mac II adapter What’s in the box?a Polaview Model 220 Projector b Remote control 2 IntroductionComputer/video compatibility Quick start Connector panel4 To supply power to the projector, connect the power cable to the power port on the rear panel of the projector. Then connect the power cord to an appropriate power outlet. Turn on the power switch located on the rear panel of the projector, beside the power port. After approximately 30 seconds after the power is on, a solid-colored image is pro- jected onto your screen R audio port, the sound emanates from both speakers 2 Detailed setup Your Polaview Model 220 ProjectorSOURCE 8 Detailed setupThe Polaroid Polaview Model 220 Projector - rear view SOURCEGetting started Connector panel The connector panelComputer and VCR connections Powerbook and 12 Detailed setupConnecting Mac Quadra, LC, andpart number CA19 plugs into the VIDEO OUT jack of your NTSC/PAL/SECAMvideo connections the cable to either of the SOURCE 1 or SOURCE 2 video14 Detailed setup S-video connectionsSupplying power to the projector 3 Using the projector Turning on the projectorFocus the projected image with the FOCUS control either Control-panel keys ENTER L & R Using the remote control 22 Using the projector The remote controlincreases or decreases setting levels the picture larger. Press - to make theSOUND menu Menu selectionsIMAGE menu Select the SETUP menu to make adjustments to the Image optimization Eliminating eliminate the horizontal noise bars. Adjust the SHARPNESSsetting until the horizontal noise bars or jittering disappears horizontal noiseTrue-to-life color 28 Using the projectorsettings rendition4 Maintenance Storage, cleaning and careThe lamp assembly and lamp-assembly door Replacing the lamp assemblyassembly door Remove the lampUnlock the lamp assembly by rotating the locking key on Standards 5 TroubleshootingTroubleshooting guide Where to get help 1 Check the Troubleshooting guidePolaroid Offices and Service Centers Troubleshooting36 Troubleshooting One Year Warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR Optional accessory Appendix A PartsReplacement product 40 Appendix A Appendix B Standards PXW8556A 10/96 Printed in U.S.A