Appendix a Parts, OG45, Replacement product | Polaroid Polaview 220

Appendix A: Parts

Listed below are all standard accessories available from Polaroid for use with the Polaview Model 220 Projector. These standard items are shipped with each model. The appropriate Polaroid part number is listed with each item.

Replacement product	Part No.

Instruction manual	OG45

US power cord or EC and UK power cord	PC01 or
	PC02 and 03

Mac monitor redrive adapter	AD06

Mac multiscan redrive adapter	AD08

VGA/Mac adapter	AD07

Phono -to-RCA adapter cable	CA26

1/8 in. phono cable	CA25

VGA/Mac II reversible cable	CA18

Remote control	RC41

Computer infrared receiver kit	SB06

RCA composite video cable	CA19

Internal NTSC/PAL/SECAM video board	UP40

Optional accessory	Part no.

Carrying case with wheels	623375

ATA-300-style carrying case with wheels	623376

Replacement lamp assembly	612273

S-video cable	CA14

Image 41

Polaroid Polaview 220 manual Appendix a Parts, OG45, Replacement product, Optional accessory

Contents

Polaview Protection against such interference when operated in a Radiate radio frequency energy and, if not installedRegarding safety, public health, environment Specifications are subject to change without notice Table of contents Appendix a Parts Appendix B Standards Storage, cleaning and care Replacing the lamp Introduction Items included with the projector What’s in the box? Computer/video compatibility Quick start Connector panel Introduction Introduction Your Polaview Model 220 Projector Detailed setupPolaroid Polaview Model 220 Projector and remote control Polaroid Polaview Model 220 Projector rear view Getting started Computer Inputs Outputs Stereo L R Redrive RS Connector panel Computer and VCR connections Labeled To VGA into the projector MAC/PC port see To Mac into the computer monitor port. Plug the end Connect one of the yellow RCA composite video cable Input composite jacks yellow on the projector connectorVideo source. Connect the yellow plug at the other end Panel see the illustration below Use Sources 1 and 2 to connect Power receptacle and AC power switch Supplying power to the projector Turning on the projector Using the projector Size by using the Zoom control on the control panel or On the control panel or remote control. Adjust the imageWant to adjust the rear feet of the projector to position Focus the projected image with the Focus control either Control-panel keys Decreases or increases the volume Image, when used with the cursorAdjusts the focus of the image Adjusts the brightness and contrast Using the remote control Brightness, contrast, tint, phase Controls the volume, balance, trebleLaser pointer Serves as a pointing device Bass of the source connected to Zoom + Zooms in and out. Press + to make Focus + Adjusts the focus of the image Menu selections Following settings Select the Setup menu to make adjustments toOr rear projection mode Resets all adjustments to Image optimization Using the cursor pad, scroll through the menu selections From the projector control panel or remote control, pressAdjust brightness and contrast. The correct combination Examine the projected image for horizontal noise bars or Adjust the color balance of the projected image Use the Tint option to make the adjustmentsChanges from the default setting are stored in memory for Control panel or remote control commands, you can Storage, cleaning and care Maintenance Replacing the lamp assembly Half revolution. Grasp the wire handle and gently pull Unlock the lamp assembly by rotating the locking key onLamp assembly straight out of the unit Align the lamp-assembly slide rails with the slide-rail Symptom Cause Solution TroubleshootingTroubleshooting guide If at any time you need help Where to get helpYour computer dealer Brasil Polaroid Offices and Service Centers New Zealand One Year Warranty Maintenance Optional accessory Replacement productAppendix a Parts OG45 Appendix a Appendix B Standards