34Troubleshooting
Symptom | Cause | Solution |
|
|
|
Projector is initializing | If screen is displayed for | |
displayed |
| more than 15 seconds, |
|
| press a source button |
|
| associated with an active |
|
| source |
|
|
|
Lamp does not light, | Unit is in Standby mode | Wait approximately |
green LED on rear | and | 3 minutes, if bulb does not |
control panel is flashing | has not elapsed | light press the LAMP key |
|
|
|
Image is not in color | Incorrect computer video | Reboot your computer |
|
|
|
No projected image | Improper cables/ | Check for proper cables |
| loose cables | and snug connection |
| CURTAIN (blue display) | Press the CURTAIN key |
| is on |
|
Active light source is not selected
Verify proper connection and press source key associated with
an active source
Video source has not | Common problem with |
been activated | laptop computers, contact |
| your computer dealer |
Where to get help
If at any time you need help:
1Check the Troubleshooting guide.
2Call your dealer’s technical support line and explain your problem.
3Call Polaroid Corporation (see pages 35 and 36).
Please have the serial number of your unit (located on the underside of the projector) available when you call.