Maintenance, Storage, cleaning and care | Polaroid Polaview 220

4 Maintenance

Storage, cleaning and care

Store the Polaview Model 220 Projector either in its original shipping container or carrying case to guard it against dust and lint. Use a non-abrasive, lint-free cloth and non-abrasive cleaning solution, such as an eyeglass or camera-lens clean- ing solution, on the lens to keep it clean. Spray the cleaning solution directly on the cleaning cloth, never on the lens.

Warning: Always disconnect your projector from its electri- cal supply before performing any maintenance on it.

Extreme temperatures Do not expose the projector to temperatures less than -13°F (-25°C) or greater than 140°F (60°C). For example, avoid storing it in parked automobiles for an extended period of time. Do not operate the projector in temperatures less than 32°F (0°C) or greater than 95°F (35°C).

Image 32

Polaroid Polaview 220 manual Maintenance, Storage, cleaning and care

Contents

Polaview Radiate radio frequency energy and, if not installed Protection against such interference when operated in aRegarding safety, public health, environment Specifications are subject to change without notice Table of contents Storage, cleaning and care Replacing the lamp Appendix a Parts Appendix B Standards Introduction What’s in the box? Items included with the projector Computer/video compatibility Connector panel Quick start Introduction Introduction Your Polaview Model 220 Projector Detailed setupPolaroid Polaview Model 220 Projector and remote control Polaroid Polaview Model 220 Projector rear view Getting started Connector panel Computer Inputs Outputs Stereo L R Redrive RS Computer and VCR connections To Mac into the computer monitor port. Plug the end Labeled To VGA into the projector MAC/PC port see Input composite jacks yellow on the projector connector Connect one of the yellow RCA composite video cableVideo source. Connect the yellow plug at the other end Panel see the illustration below Use Sources 1 and 2 to connect Supplying power to the projector Power receptacle and AC power switch Using the projector Turning on the projector On the control panel or remote control. Adjust the image Size by using the Zoom control on the control panel orWant to adjust the rear feet of the projector to position Focus the projected image with the Focus control either Control-panel keys Image, when used with the cursor Decreases or increases the volumeAdjusts the focus of the image Adjusts the brightness and contrast Using the remote control Controls the volume, balance, treble Brightness, contrast, tint, phaseLaser pointer Serves as a pointing device Bass of the source connected to Focus + Adjusts the focus of the image Zoom + Zooms in and out. Press + to make Menu selections Select the Setup menu to make adjustments to Following settingsOr rear projection mode Resets all adjustments to Image optimization From the projector control panel or remote control, press Using the cursor pad, scroll through the menu selectionsAdjust brightness and contrast. The correct combination Examine the projected image for horizontal noise bars or Use the Tint option to make the adjustments Adjust the color balance of the projected imageChanges from the default setting are stored in memory for Control panel or remote control commands, you can Maintenance Storage, cleaning and care Replacing the lamp assembly Unlock the lamp assembly by rotating the locking key on Half revolution. Grasp the wire handle and gently pullLamp assembly straight out of the unit Align the lamp-assembly slide rails with the slide-rail Symptom Cause Solution TroubleshootingTroubleshooting guide If at any time you need help Where to get helpYour computer dealer Polaroid Offices and Service Centers Brasil New Zealand One Year Warranty Maintenance Replacement product Optional accessoryAppendix a Parts OG45 Appendix a Appendix B Standards