Polaroid Polaview 220 manual Ntsc/Pal/Secam, video connections, Composite video

Detailed setup 13

NTSC/PAL/SECAM	Place the projector on a tabletop or other level surface
video connections	with the lens facing the projection screen.
	1 Connect one of the yellow RCA composite video cable
	(part number CA19) plugs into the VIDEO OUT jack of your
	video source. Connect the yellow plug at the other end of
	the cable to either of the SOURCE 1 or SOURCE 2 video-
	input composite jacks (yellow) on the projector connector
	panel (see the illustration below).
Composite video
connections

VCR or laser disk player

AUDIO VIDEO S-VIDEO

L R

Yellow

Red

White

White			SOURCE 1
Red			SOURCE 2
Yellow
SOURCE 1	SOURCE 2	SOURCE 3	SOURCE 4	OUTPUTS
L R	L R	STEREO	STEREO	STEREO L	R
		MAC / PC	PC / MAC	REDRIVE	RS 232
VIDEO INPUTS		COMPUTER INPUTS

Use SOURCES 1 and 2 to connect more than one audio/video device (one cable per device)

Audio/Video cable

The projector is also compatible with S-video sources

(for the appropriate connections, refer to the illustration on the next page).

Note: You must connect audio and video sources to the same source channel if you plan to select them simultane- ously.

2Connect the red RCA audio-video cable plug to the AUDIO R (right) jack of your audio source. Then connect the red plug at the projector end of the cable to a red audio jack (either SOURCE 1 or SOURCE 2 R) on the projector connector panel.