Fujitsu 3400 manual Connector Pen Tablet Icon Purpose

Table 1-2 Peripheral Connectors/Interfaces

Connector/	Fig.	Pen Tablet Icon	Purpose
Peripheral	Ref.
IrDA/FIR port	1-1		An infrared transceiver built into the pen tablet
			allows you to communicate with other devices
			that are compliant with the IrDA Standard Rev.
			1.1. Effective range for infrared communication is
			about 3 feet, and within 15 degrees off of center.

Aclear line-of-sight path must exist between the IrDA port on the pen tablet and the IrDA transceiver on the other device.

Modem	1-1	Connect a telephone line to the optional internal
		modem using a standard RJ-11 telephone plug.
High-Usage	1-2	Install the pen tablet in an approved docking
Metal Contacts		device. The contacts provide DC input and USB
		interface.
System	1-2	Connect the Stylistic 3400 port replicator or other
interface port†		approved docking device. Refer to the
		documentation accompanying the docking device
		for more information.
Infrared	1-1,	An infrared receiver built into the pen tablet allows
keyboard port	1-2	you to communicate with a wireless infrared
		keyboard. The keyboard infrared port works
		optimally between 10 to 30 cm (approximately
		4 in. to 12 in.) from the keyboard infrared port,
		located on the bottom edge of the pen tablet.
		Ensure that there is a clear line-of-sight path
		between the infrared receiver on the pen tablet
		and the infrared transmitter on the keyboard.
KensingtonTM	1-2	The Kensington MicrosaverTM security slot allows
Lock slot		you to secure the pen tablet using
		Kensington-compatible locking devices.

†Open the connector door to access these connectors.

Connectors and Peripheral Interfaces 13