Fujitsu 3400 manual Off state, Changing System States

•Off state

All system functions are turned off to conserve power. The system does not respond to the pen or other input. The system boots at the next system power-on.

Note: The system consumes the same amount of power whether it is in Save-to-Disk mode or the Off state.

Your system may be configured to enter some of these states automatically after a period of inactivity to conserve battery power.

When you use the Stylistic 3400 pen tablet, you can change the current system state in a number of ways, depending on which state the system is in. To determine the current system state, observe the Power icon in the Status display. Table 2-1 gives the different system states represented by the Power icon and describes how you can change the system state from the current state.

Table 2-1 Changing System States

Power Icon	Current State	To Change State*
Appearance
Power icon displayed	On State	To enter the Off state, shut down the system
continuously	or	using the Start menu on your system.
	Idle State
		To enter Suspend-to-RAM or Save-to-Disk†
		state, suspend system operation using either
		a hardware or software suspend.
Power icon blinking	Suspend-to-RAM†	To enter the On state, resume system
		operation by pressing the Suspend/Resume
		button.
		To enter the Off state, resume system by
		pressing the Suspend/Resume button, then
		shut down your system.
Power icon not	Off State	To enter the On state, start your system, or
displayed	or	resume system operation by pressing the
	Save-to-Disk†	Suspend/Resume button.

*Information in Table 2-1 is supplied to help you understand which system states your system can enter from the current system state. Refer to the procedures on starting the system, shutting down the system, suspending system operation, and resuming system operation given later in this chapter.

†Your system may be configured to use either Suspend-to-RAM mode or Save-to-Disk mode.

16Using the Stylistic 3400 Pen Tablet