Fujitsu 3400 manual Modem Connection, Operation of the Bridge Battery

Operation of the Bridge Battery

When installed in the pen tablet, the battery pack provides power to some system components—even when the system is in the Off state. When the battery pack is removed, power is supplied to these components by a “bridge” battery that is built into the pen tablet.

The bridge battery is not designed for long-term operation. To maintain the bridge battery properly, observe the following measures:

Note: The system arrives with the bridge battery in a discharged state.

•To prevent draining the bridge battery, always store the pen tablet with a charged battery pack installed.

•If the bridge battery becomes drained, it takes approximately 11 hours for it to be fully recharged.

•The bridge battery charges when the AC Adapter is connected and the system is in On or Off states or Suspend mode. It charges from the battery only when the system is in the On state.

Modem Connection

Note: • The internal 56 Kbps LAN/modem module installed in the Stylistic 3400 pen tablet has actual maximum transfer rates of 53 Kbps (receive), 33.6 Kbps (send), and 14.4 Kbps (fax). Download rates are limited to 53 Kbps in the United States due to FCC restrictions.

•The LAN portion of the internal LAN/modem module can only be used when the system is used with the optional mini-dock or port replicator; there is no LAN port on the system itself.

The Stylistic 3400 pen tablet is designed to accept a standard RJ-11 telephone plug. Connect the plug to the modem jack located on the top of the pen tablet, to the left of the IrDA port (reference Figure 1-1). The telephone plug can be installed whether or not the pen tablet has power applied.

If you need assistance configuring the Stylistic 3400 pen tablet modem or LAN, contact your local help desk or your reseller.

28Using the Stylistic 3400 Pen Tablet