To toggle between using the pen for inking and using it as a mouse, click on the small pen icon in the system tray at the bottom right of the screen.
Here are some hints on using the pen like a
•To select an object, tap the mouse tip on the object once. This functions like a mouse button click with the left mouse button.
•To
•To generate a “right mouse button
•To move, or “drag”, an object on the screen, place the pen tip directly over the object, then as you hold the pen tip against the screen, move the pen.
Calibrating the pen
Calibration of the pen adjusts the cursor position on the screen relative to the position of the pen tip. You calibrate the pen to adjust the distance error between where the pen actually touches the screen and where the system “thinks” the pen is touching. If the event you wish to invoke is not displayed under the pen tip when you use the pen, you should calibrate the pen.
Pen calibration may be required due to the following situations:
•The pen is being used for the first time.
•The previous user of the Stylistic 3400 pen tablet writes with the opposite hand or at a different pen angle.
•The system has been in use for some time and the pen has not been recalibrated.
•The original system image has been restored.
To Calibrate the Pen
1.Open the Control Panel from the StartSettings menu, and
2.Position the Stylistic 3400 pen tablet as you normally would during use. Be sure to hold the pen at the angle that you regularly use. Touch the screen only with the pen tip; if you inadvertently touch the screen with your finger or hand during the calibration process, faulty calibration may result.
Using the Pen | 23 |
