3 Using the projector
Turning on the projector
Turn on the power switch located on the rear panel of the projector, beside the power port. After approximately 30 seconds after the power is on, a solid blue image is projected onto your screen. Whenever the power is on, the green LED power indicator on the rear panel of the projector glows a steady green.
Note: You can detect a
Caution: Never operate the projector if the air intake or exhaust grills are clogged or obstructed, or if the electric fans are not running.
Turn on your computer or video source. Select the desired source for display by pressing the appropriate SOURCES button on the projector control panel or remote control. Your computer or video image then appears on the projec- tion screen. The selected SOURCES button is backlit green; all other SOURCES buttons are backlit red.