Aastra Telecom 800 manual Setting up Video Telephony, Address Queries using Ldap

Configuring the PC Software Setting up Video Telephony

13.3Setting up Video Telephony

You can use the OpenCTI to switch on the video function during an internal call. To be able do this, the Microsoft NetMeeting 3.0 program must be installed and set up on all participating workstation computers.

Note: NetMeeting is already pre-installed on the Microsoft

Windows XP operating systems.

Setting up Microsoft NetMeeting 3.0

1.Connect a standard web cam to the workplace computer and install the driver.

2.In the Windows Start menu select Run and enter: “conf.exe”. Confirm your selection with OK.

3.Follow the instructions of the Install Wizard. Registration in an Internet directory is not necessary and is not recommended. Select the installed web cam and exit the Install Wizard.

4.Run a functionality test. To do this, start the NetMeeting program. Click on the call button. Under Address enter the IP address or DNS host name of a external station. Confirm your selection with Call.

Note: If Firewall software is installed on the workstation computer, a warning will now appear. This shows that the computer is now ready to receive the NetMeeting. You must allow the NetMeeting, by activating the Do not show this message for this program again option for example.

13.4Address Queries using LDAP

You can search the data of the central telephone book of the Aastra 800 from a workstation computer in the LAN using LDAP (Lightweight Directory Access Pro- tocol). When configuring an LDAP-enabled program, specify the IP address of the Aastra 800 as the address of the LDAP server.

LDAP with Outlook Express

You can configure and operate the LDAP directory service with Outlook ExpressTM, a MicrosoftTM e-mail program, as follows:

123