Aastra Telecom 800 manual Start Procedure, Telephone type File name

Voice over IP (VoIP) VoIP System Telephones

2.Configure the Aastra 800’s DHCP server to assign IP addresses. To do this, call up the Configurator and open the Network: DHCP page. Click on the Change button.

3.From Status, select the address assignment option. Confirm with Apply. The DHCP page is re-displayed.

4.Add the configured VoIP system telephones to the list of IP addresses. Click on the New button.

5.Enter the VoIP system telephone’s IP address and MAC address. Enter the IP address reserved by the DHCP service program. Confirm with Apply.

Restart the Aastra 800 and all connected VoIP system telephones.

7.4.4 Start Procedure

It may sometimes be useful to understand a VoIP system telephone’s start pro- cedure. Examples:

■A complex DHCP address assignment prevents the operation of the Aastra 800’s DHCP server within the LAN.

■A VoIP system should be operated with a non-broadcast-capable IP con- nection. This may be an RAS connection, a VPN connection or another type of routed connection.

An external DHCP server can also control a VoIP system telephone’s start pro- cedure. In this case, system software matching the type of VoIP system telephone must be transferred via TFTP.

The file name is determined by the telephone type.

Telephone type	File name
OpenPhone 63 IP	/ram/ip_tel/opi63.cnt
OpenPhone 65 IP	/ram/ip_tel/opi65.cnt

74