Voice over IP (VoIP) | Quick Start |
|
|
■Operation of
■TC system networking using
■Setting up a DECToverIP network lets you use existing Ethernet cabling to set up a DECT network. The special DECT base stations designed for this purpose, can be handled using Aastra 800’s Web interface (see DECT over IP® starting on page 82).
Integrating voice and data communication within the Intranet can provide savings possible and a range of new possibilities. However joint usage of existing network infrastructure may also cause conflicts, with IP address configuration via DHCP for example (for details see Start Procedure starting on page 74). You should therefore always plan the use of VoIP in the Intranet together with your network adminis- trator. In order to avoid possible conflicts please also note the information under Fundamentals starting on page 62.
7.1Quick Start
7.1.1 IP System Telephony
VoIP system telephony can be quickly and easily set up using the Aastra 800.
1.Go to the page Telephony: Devices: VoIP Telephone and click on New. Enter the MAC Address printed on the underside of the IP system telephone. Select the Type and enter an internal Number. Option: enter an IP address from the Aastra 800 IP network which is not being used. Click on Apply.
2.Connect the IP system telephone’s LAN connection to the LAN and connect the phone to the mains power using the power supply unit provided. Alternatively, activate
Note: Use a shielded
Shielded Twisted Pair cable) to connect an IP telephone to a
Local Area Network (LAN).
59
