Factory Settings on Delivery |
|
| Authorisations | |
|
|
|
|
|
User group settings |
|
|
|
|
|
|
|
|
|
Function / Authorisation | Standard | Adminis- |
| Guests |
|
| trators |
|
|
|
|
|
|
|
Number of suppressed digits *) | 0 | 0 |
| 0 |
Incoming basic amount *) | 0,00 | 0,00 |
| 0,00 |
Outgoing basic amount *) | 0,00 | 0,00 |
| 0,00 |
Cost factor *) | 100% | 100% |
| 100% |
Network *) |
|
|
|
|
+ | + |
| - | |
Send | + | + |
| - |
Others *) |
|
|
|
|
Speed dialling *) | + | + |
| - |
Keypad dialling *) | + | + |
| - |
Time control *) | - | - |
| - |
Booking number may be set up*) | + | + |
| - |
Send short messages*) | + | + |
| - |
*) These settings are shown only in the Expert view.
The following important settings are active without further configuration:
■External authorisation: International numbers can be dialled from all con- figured terminals. External lines must be seized by entering a preset code.
■Call forwarding to internal and external numbers can be activated. Call for- warding after delay is performed after 20 seconds. Call diversions for other users and call diversions by other users are deactivated.
■The telephone lock can be activated. The terminal PIN is “0000”.
■The white list, black list and call filter are not preconfigured and therefore not active. If these lists are configured, they can be activated for user groups.
■Every standard user can change the configuration of Aastra 800.
14
