Voice over IP (VoIP) | VoIP System Telephones |
|
|
3.Enter the MAC address of the VoIP system telephone. You will find the MAC address on the underside of the device. Click on List configuration. The status bar at the bottom edge of the program window displays “list OK”.
4.Change the desired settings under Configuration of the IP Phone. Click on Reset configuration to activate the standard settings for all entry fields.
5.Click on the Send configuration command to transfer the currently shown configuration to the VoIP system telephone. The status bar at the bottom edge of the program window displays “send OK”.
Note: The VoIP system telephone receives the configuration and sends a response. The new configuration is only saved and activated once this has happened. This can result in the “IP Phone Configurator” not receiving the response of the VoIP system telephone.
Please note: If you are operating multiple network cards with active IP configuration in your PC, this may mean that the loading of configuration data fails. First you deactivate additional net- work cards or use a
You can implement the following settings:
IP parameter locally configured: Select the yes option to activate manual IP address configuration. Select the no option to activate automatic IP address con- figuration via BOOTP/DHCP.
IP address and Netmask: Enter an available IP address and the network mask to be used by the VoIP system telephone.
TFTP server IP address and TFTP server filename: Enter the IP address and the complete file name for the operating software of the VoIP system telephone For the Aastra 800, use always the IP address of the communications system.
Registration IP address and Registration port: This is where you usually enter the IP address of the Aastra 800 and the port number 8100.
78
