Voice over IP (VoIP) | Quick Start |
|
|
Type. To configure a third party SIP telephone, select the “SIP” option. Enter an internal Phone No. Click on Apply.
2.Call up the User Manager: User page. Assign the new internal call number to a user.
Tip: | Internal SIP telephones can also be operated by users without |
| passwords. If you do not assign the call number of the SIP tel- |
| ephone to a user, you can only configure a “Guest” user ac- |
| count on the SIP telephone. |
3.An internal SIP telephone can be operated with a dynamically assigned IP address. If the SIP telephone has its own Web interface, for example, a static IP address can be practical. Click on New on the Network: DHCP page. Enter the MAC address of the SIP telephone and an available IP address and click on Apply.
4.Configure the SIP telephone or the SIP telephony software. Please also refer to the configuration help on the Telephony: Devices: VoIP Phones page. For the desired call number, click on (Help) and select a suitable help page under Type.
A configuration dialog of SIP telephony software
61
