Polycom DOC2559C manual 3RMX 4000 Rack Mount

Polycom RMX 4000 Hardware Guide

3Fasten the RMX to the rack with 8 screws into the holes provided on the RMX’s front as shown in Figure 1-3.

Figure 1-3RMX 4000 Rack Mount

Rack mounting screws must be supplied by the rack’s manufacturer.

The airflow of the RMX 4000 is from right to left. Be sure that the areas on the left and right side of the system are clear for proper

ventilation.

When the unit is installed on a rack, the rack must be properly grounded to the central office ground. The rack must be grounded with two-hole compression- type connectors using copper conductors (tinned or untinned). Wire, bus bar or braided strap connectors are acceptable.

1-13