Installing the Replacement MPM+/MPMx Card | Polycom DOC2559C

Polycom RMX 4000 Hardware Guide

5Carefully slide the MPM+/MPMx card out through the front panel.

Installing the Replacement MPM+/MPMx Card

1On the card to be installed, move the ejector levers to their fully open position.

2Slide in the replacement MPM+/MPMx card.

3Push the MPM+/MPMx card firmly into the Backplane, making sure it is properly seated in its slot.

4Ensure that the metal ejector levers are fully retracted into their housings.

5Tighten the captive screws on the front panel of the RMX that secure the MPM+/MPMx card to the chassis.

2-13

Image 57

Polycom DOC2559C manual Installing the Replacement MPM+/MPMx Card

Contents

Polycom RMX 4000 Hardware Guide USA Συμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Russian Communication Certificate Regulatory Notices Table of Contents ISDN/PSTN Clock Source MPM+ and MPMx Media Cards RMX 4000 Rear Panel RTM-IP Hardware Description Power Consumption Power SupplyPhysical Media Protocols Conferencing Capacities RMX 4000 System CapacitiesFollowing table summarizes the different system capacities Environment System Functions MPM+ Mode MPMx Mode Resource Capacities per Card Assembly MPMx CardMPM+ Card Maximum Possible Resources Per Card Resource Capacities per Card Type MPM+ and MPMxResource Type MPMx Site Safety Requirements Safety Requirements Rack Mount Safety Precautions General Installation Precautions Unpacking the RMX Installing the RMX Hardware Description Installing the RMX in a Rack or as a Standalone Standalone RMX 4000 InstallationRack Mount Preparations Placing the RMX 4000 in a 19 Rack 2Installing chassis runners and RMX in a rack 3RMX 4000 Rack Mount 4Removing and attaching 19 and 23 brackets Placing the RMX 4000 in a 23 Rack To reverse mount the RMX 4000 on a 19 rack Reverse Mounting the RMX 4000 in a Rack Connecting the RMX 4000 to Power Sources Make sure that the power button is switched OFF on the RMX Connecting the RMX 4000 to AC Power Connecting the RMX 4000 to -48DC Selv Power Type a Type B Types of DC Circuit Breakers installed on RMX To connect the cables AC and DC systems RTM-IP Connecting Cables to the RMX First-time Power-up For more information about specific card connections, seeRTM LAN on RMX 4000 Front Panel RMX 4000 Components 8shows the front panel of an RMX 4000 DC system Component Description MPM+ and MPMx Media Cards Card Configuration Mode Selection During Startup / Restart 9RMX 4000 AC Rear View RMX 4000 Rear Panel 10RMX 4000 DC Rear View RTM-IP LAN 3 Cntl Following items appear on the RMX 4000 rear panel Standby button Toggle between CPU activation and standby RTM Isdn ISDN/PSTN Clock Source AC Power Entry Module PEM DC Power Rail Module Component Slot AllocationSlot ID/No Card/Component Requirement RTM ISDN/RTM Following items appear on the RMX 4000 front panel RMX 4000 Front Panel LEDsComponent LED Color Description Card Insertion Initiated If during Card removal Initiated The card Cntl 4000 Unit RTM-IP RMX 4000 Rear Panel LEDsFollowing LEDs appear on the RTM-IP 4000 card LED Color Description Name Function Name Following LEDs appear on the RTM LAN Following LEDs appear on the RTM Isdn RTM Isdn Component Replacement Component Replacement Handle Using the Modified PMC Compatible Ejector Lever Replacing the Cntl 4000 Module Replacing an AC Power Supply Module Replacing an AC Power Entry Module PEM Replacing a DC Power Rail Module PRM Component Replacement Carefully slide the Fan drawer out through the front panel Replacing the Fan Drawer Inserting an Air Filter Optional in the Fan Drawer Removing the MPM+/MPMx Card from the MCU Replacing an Faulty MPM+/MPMx Card Component Replacement Installing the Replacement MPM+/MPMx Card Replacing the RTM Isdn Card Installing an MPM+/MPMx Card on the RMX PRI Cables Replacing the RTM-IP Replacing the RTM LAN Replacing the Fabric Switch Module FSM Polycom RMX 4000 Hardware Guide