Polycom DOC2560B manual Mounting the RMX 2000 in a Rack, 2-12, Installing the RMX

Chapter 2-First Time Installation and Configuration

Installing the RMX 2000

For detailed instructions, precautions and requirements for installing the RMX 2000 refer to the Polycom RMX 2000 Hardware Guide.

•The following procedures have to be performed to install the RMX

2000 in your site:

•Installing the RMX in a rack or as a standalone

•Connecting the RMX 2000 to the power source

•Connecting the network (LAN, IP and ISDN) cables to the RMX

Mounting the RMX 2000 in a Rack

There are two methods for installing the RMX in a 19” rack:

•Using rack brackets on the RMX 2000– Install rack brackets, supplied by the rack manufacturer, in the rack. Mount the RMX 2000 on top of the rack brackets. Fasten the RMX to the rack with screws through the four holes in the RMX’s front mounting brackets.

•Using a shelf – Install the shelf, supplied by the rack manufacturer, in the rack. Mount the RMX on the shelf. Fasten the RMX to the rack with screws through the four holes in the RMX’s front mounting brackets.

2-12