Polycom DOC2560B manual User Definition, Selecting the RMX Web Client Languages, 2-41

Polycom RMX 1500/2000/4000 Getting Started Guide

On first entry, the default Username and Password are both POLYCOM.

In the RMX Web Client’s Main Screen an MCU State indicator displays

a progress indicator showing the time remaining until the system start-up is complete.

39Create a new User with Administrator permissions and delete the default User (POLYCOM).

For system security reasons the system is not fully configured until this step has been performed.

For more information see the RMX 1500/2000/4000 Administrator’s Guide, "Users, Connections and Notes” on page 12-1.

40The system is now fully configured and if there are no System Errors, the green RDY LED on the CNTL module (on the RMX’s front panel) turns ON.

The Fast Configuration Wizard configures the Default IP Network Service with common parameters. Specific or additional settings (e.g. for ICE, or Secured Mode) should be performed once the initial configuration is complete. For detailed description of the IP Network Services, see the RMX 1500/2000/4000 Administrator’s Guide.

User Definition

The RMX is shipped with a default Administrator user called POLYCOM. Once you have defined other authorized administrator users, it is recommended to remove the default user to prevent unauthorized users from logging into the system.

For more information, see the RMX 1500/2000/4000 Administrator’s Guide ”Deleting a User” on page 12-4.

Selecting the RMX Web Client Languages

By default, the RMX Web Client interface is displayed only in English. However, the system administrator can choose the languages available for selection on the Login screen. These languages are represented by flags.

To choose the languages for selection in the Login screen:

1On the RMX menu, click Setup > Multilingual Setting.

2-41