Polycom DOC2560B manual 2-24, Click Next, Field, Description

Chapter 2-First Time Installation and Configuration

Table 2-3Fast Configuration Wizard – IP Signaling

Field	Description
Network Service	The name Default IP Service is assigned to the IP
Name	Network Service by the Fast Configuration Wizard.
	This name can be changed.
	Note: This field is displayed in all IP Signaling dialog
	boxes and can contain character sets that use
	Unicode encoding.
Signaling Host	Enter the address to be used by IP endpoints when
IP Address	dialing in to the MCU.
	Dial out calls from the RMX are initiated from this
	address.
	This address is used to register the RMX with a
	Gatekeeper or a SIP Proxy server.
Media Card 1-4	Enter the IP address(es) of the media card (s)
IP Addresses	(MPM/MPM+/MPMx 1 and MPM/MPM+/MPMx 2-4
	(if installed)) as provided by the network
	administrator. Endpoints connect to conferences
	and transmit call media (video, voice and content)
	via these addresses.
Subnet Mask	Enter the subnet mask of the MCU.
	Default value: 255.255.255.0.

If Secured Communication is required on the RMX: complete the Fast Configuration Wizard, Login, install the Certificate and then enable Secured Communication Mode.

2Click Next.

2-24