Polycom DOC2560B First Entry Power-up and Configuration, Procedure 1 First-time Power-up, 2-19

Polycom RMX 1500/2000/4000 Getting Started Guide

First Entry Power-up and Configuration

Preparations

Hardware

Installation

and

Setup

First Entry

Power-up and

Configuration

There are four procedures necessary for setup of the new RMX. It is important that they are performed in the following sequence:

1First-time Power-up

2Product Registration.

3Connection to MCU.

4Modifying the Default IP and ISDN/PSTN Service Settings (Fast Configuration Wizard).

Procedure 1: First-time Power-up

To power-up for the first time using the USB key:

1Insert the USB key containing the modified IP addresses in USB port on the RMX 1500 front panel and RMX 2000/4000 back panel.

2-19