Polycom m100 manual Specifying SIP Settings, To specify SIP settings, Settings Description

Configuring Network Settings

	• Specify - Calls use the specified gatekeeper.
Gatekeeper IP	Specifies the IP address or name of the gatekeeper.
Address
	Specifies the name that gatekeepers use to identify this
	system. You can make Point-to-point calls using H.323 Alias
H.323 Alias	(Name) if both systems are registered to a gatekeeper.
	The H.323 Alias (Name) is the same as the Display Name,
	unless you change it.
H.323 Extension	Specifies the extension that gatekeepers and gateways use
(E.164)	to identify this system.

Related Topics

Specifying Your Network Preferences

Specifying SIP Settings

Specifying SIP Settings

If your network supports the Session Initiation Protocol (SIP), you can use SIP to connect IP calls. To use SIP, go to Menu > Preferences > SIP and enable SIP.

To specify SIP settings:

1.From the main window, click Menu > Preferences > SIP.

2.Click Enable SIP if SIP is available on your network and you would like to use it.

3.Specify the following settings:

Settings	Description
Transport	Specifies the protocol the system uses for SIP
Protocol	signaling.
	• TCP - Provides reliable transport via TCP for
	SIP signaling.
	• UDP - Provides best-effort transport via UDP
	for SIP signaling.
Type of SIP	Specifies whether to register your information with a
Server	SIP server.
Display Name	Displays the name that you entered on the General tab
	and that is displayed to the far site during calls.
User Name	Specifies the user name for authentication with a
	Registrar Server.
Domain	If you use Broadworks SIP server, specifies the domain
	name for authentication with Registrar Server.
	If you use Polycom DMA server as the SIP server,
	leave the domain blank.
Password	Specifies the password for authentication with Registrar
	Server.

21