Schneider Electric HRB1684301-01 user manual Chapter Meter webpages, Accessing the meter webpages

Chapter 5 Meter webpages

This section describes the meter’s webpages. The meter’s Ethernet connection allows you to access the meter so you can view data and perform some basic configuration and data export tasks using a web browser.

Accessing the meter webpages

Open a web browser and enter the meter’s IP address in the address box. When prompted, enter your username and password.

NOTE: The webpages are accessed through the meter’s Ethernet port so it must be configured properly. See “Configuring Ethernet settings using a browser” on page 54 for instructions on changing the factory default Ethernet settings.

Webpage UI overview

The meter webpages contain typical elements as shown below.

Company logo Meter brand and model

Menu commands

Webpage content

Firmware version

Company and copyright statement

User name

Webpages setup

You can configure the Ethernet port, user names and passwords, and device log exports through the webpages’ Setup menu.

Ethernet communications settings

The meter is factory-configured with default Ethernet settings. You must change the default settings before connecting the meter to your network.

HRB1684301-01 53