Schneider Electric HRB1684301-01 Environmental characteristics, EMC electromagnetic compatibility

PowerLogic™ PM5500 series user manualChapter 2—Hardware reference

Electrical characteristics (Continued)

	Number / type	4 - Externally excited digital inputs
	Voltage ratings	ON state: 15 - 30 V AC / 15 - 60 V DC
		OFF state: 0 - 6 V AC / 0 - 6 V DC
	Input resistance	100 kΩ
Status inputs	Frequency	25 Hz maximum
	Pulse width	50% duty cycle (20 ms minimum ON time)
	Response time	10 ms
	Opto Isolation	2.5 kV RMS for 60 seconds
	Input burden	2 mA at 24 V AC/DC
		2.5 mA at 60 V AC/DC

Environmental characteristics

Operating	Meter	-25 to 70 °C (-13 to 158 °F)
		-20 to 70	°C (-4 to 158 °F). Display functions to -25 ºC
temperature	Display
		(-13 °F) with reduced performance.
Storage temperature	Meter and display	-40 to 85	°C (-40 to 185 °F)
Humidity rating		5 to 95%	RH non-condensing at 50 °C (122 °F)
Pollution degree		2
Altitude		< 3000 m (9843 ft)
Location		Not suitable for wet locations.

EMC (electromagnetic compatibility)

Harmonic current emissions	IEC 61000-3-2
Flicker (voltage fluctuation) limits	IEC 61000-3-3
Electrostatic discharge	IEC 61000-4-2
Immunity to radiated fields	IEC 61000-4-3
Immunity to fast transients	IEC 61000-4-4
Immunity to surge	IEC 61000-4-5
Conducted immunity 150kHz to 80MHz	IEC 61000-4-6
Immunity to magnetic fields	IEC 61000-4-8
Immunity to voltage dips	IEC 61000-4-11
Immunity to damped oscillatory waves	IEC 61000-4-12
Radiated emissions	FCC part 15, EN55022 Class B
Conducted emissions	FCC part 15, EN55022 Class B

Safety

Europe	LVD compliance (EN61010-1:2010)
U.S. and Canada	cULus (UL61010-1:2012, CSA22.2 No.61010-1-12)
Protective class	Protective class II. Double insulated for user accessible
	parts.

RS-485 communications

Number of ports	1
Maximum cable length	1219 m (4000 ft)
Unit loads	Up to 32 devices on the same bus
Parity	Even, Odd, None (1 stop bit for Odd or Even parity; 2 stop
	bits for None)
Baud rate	9600, 19200, 38400 baud
Protocol	Modbus RTU, Modbus ASCII (7 or 8 bit), JBUS
Firmware and language file update	Update via the communication port using DLF3000
Isolation	2.5 kV RMS, double insulated

HRB1684301-01 29